527F-ROT-DC - Calmotion

Go to content

Main menu:


CNC Control
• Replaces existing DC rotary card without any re-wiring
• High speed 527F axis control communication
• Cold start offset can be set in parameter table. Eliminates manual rotation of resolver position to achieve desired cold start position
• 2X feedback resolution of the legacy control


4th axis controller for rotary tables with DC motors. Core charge $1,000

$ 1,500.00 Add
Product Description

The 527F-ROT-DC adds 4th axis capability to a 527F control. Existing legacy wires plug into similar locations for the resolver feedback and amplifier command signal. The feedback of the 527F-ROT-DC provides 2X the resolution than the legacy axis cards. Limits can be progranned if desired.

A CAT5 cable is included for connection to the 527F control bus. This axis card should be plugged into slot 13 of the S100 bus. A functioning clock card is required.

Back to content | Back to main menu