LANCNC-MAZ - Calmotion

Go to content

Main menu:

LANCNC-MAZ

Ethernet to CNC
Features
• Drag and drop files to and from CNC data server.
• Load remote files on the network from the CNC
• Receive email alerts from the CNC (DNC mode)
• Ethernet connection using standard FTP protocol. No special software required.
• 10/100 BaseT Ethernet
• Replaces cassette tape and floppy disc CMT I/O storage units with network back-up capability
• Low cost wireless option available
• G-code DNC (drip feed) operation from data server
• Local connection of the server to the CNC that is independent from the network eliminates risk due to network outages.
• SD Memory card file storage in case of network outage
• Mid-tape start with search function.
• Insert preparatory data prior to DNC operation
• Tape input for file loading into CNC memory
• Punch CNC memory file to data server
• Multiple directory file support

LANCNC-MAZ

Ethernet controller for Mazak CNC's. Will work in CMT and G code modes.

$ 599.00 Add
The LANCNC-MAZ controller, designed especially for Mazak CNC's, provides FTP server functionality for Mazak milling and turning centers. These include the T1, M1, T2, M2, M Plus, M32 and T32 that use CMT-I/O interface with Mazatrol files. The LANCNC-MAZ supports both G-code and Mazatrol file formats. This unique controller allows users to add an Ethernet or wireless data server at the CNC. Large files that will not fit in the memory of the CNC can be drip fed (DNC) directly from the data server. The standard capacity is 2 GB with options for additional memory storage.
The LANCNC-MAZ has been designed to operate with standard software that comes with a PC such as Internet Explorer from Microsoft. There are no additional licenses or additional interface software requirements. A programmer can simply drag and drop a file from his PC to the data server. Once loaded on the server, an operator can load the file into CNC memory or drip feed a program directly from the file server. An operator can also save a program from machine memory onto the server. The LANCNCMAZ also supports a remote request mode in which an operator can search for a file on the network and import into the local data server. There are no NC files to modify, simply look for the required file on the LANCNC screen and load. In G code mode, a search and mid-tape start function is also available providing a machine operator the ability to start at a specific location in a program file in the case of tool breakage.

The LANCNC-MAZ employes a unique design to provide network lag protection. CNC controls can be extremely sensitive to the flow of data through the RS-232 port. Any disruption to this flow can create problems in the part being machined. To protect  against this, the LANCNC-MAZ always buffers the entire program at the machine. The LANCNC-MAZ is a dedicated computer that responds immediately to changes in the data flow to and from the CNC.

Since the programs are buffered or stored on the LANCNC-MAZ,  the LANCNC-MAZ continues to run even if the network fails. If the network starts to lag or lose integrity, the LANCNC-MAZ will continue to run in real time. The SD memory card on the LANCNC-MAZ can also be removed and files can be added or removed at a PC if the network is completely down.

 
Back to content | Back to main menu